Hot and Fast Smoked Texas Brisket

It doesn’t take 20 hours to produce a high quality smoked brisket. I’ve been refining a method to produce great Texas-style smoked brisket in about 5 to 7 hours. This method reduces cooking time by increasing cooking temperature from 250 degrees to about 500 degrees.

I’ve been working on this method for more than three years, ever since a friend gave me an old smoker a woman in his neighborhood had left on the curb in front of her house. I’ll often smoke a brisket on weekends when the weather makes it difficult to fly or work outdoors.

I’ve smoked at least a three dozen briskets over the last three years. I’ve done 20-hour smokes in rain and ice, and have paced back and forth from the back porch to the smoker to manage its fire.

I’ve experimented with wrapping in butcher paper, foil, or no wrap at all. I’ve tested injections and rubs of all varieties. I’ve even read books, and have studied blog posts and forum comments on how to smoke brisket. I had to make some pretty bad briskets before I could make a good one. Fortunately, even bad brisket is still pretty good.

This slideshow requires JavaScript.

What I like about this method is that it dramatically cuts the cook time by a large margin depending on the size of your brisket. I find this method simple, relaxing and rewarding:

Here’s what you’ll need:

  • Offset smoker
  • 1 whole brisket, approximately 12-15 pounds
  • Post oak wood
  • 1 bag Kingsford charcoal and lighter fluid
  • Salt Lick Original Dry Rub
  • Kosher Salt
  • Coarse black pepper
  • Meat thermometer
  • Pink butcher paper
  • Small- to medium-sized cooler

Hot and Fast Texas Brisket Recipe

  1. Start a charcoal fire in the smoker’s firebox. When the coals are white hot, add one to two pieces of wood. The goal is to convert wood into smoke and hot coals.
  2. After your fire is stable, it’s time to prepare the brisket. Rinse the brisket and pat it dry with paper towels. If I buy an untrimmed packer brisket, I’ll spend a few minutes trimming the fat so that there is no more than one-quarter inch of fat anywhere on the brisket. Next, liberally and evenly rub the brisket with kosher salt, coarse black pepper and Salt Lick Original Dry Rub.
  3. Once your fire is producing clean, wispy blue smoke, add the brisket to the smoker fat side up with the thickest end pointed toward the firebox.
  4. For the next several hours, monitor the fire and keep your smoker’s temperature between 400-600 degrees. Add wood as needed. This is important: resist the temptation to check on the brisket throughout the smoke. Keep the enclosure closed as much as possible so not to lose heat.
  5. After about two hours, check the brisket’s internal temperature with a meat thermometer.
  6. When the internal temperature of the brisket hits 170 degrees, wrap the brisket tightly in butcher paper. You won’t use tape here, so it’s preferable to wrap in multiple layers of paper to ensure a snug fit.
  7. Place the brisket back on the smoker and maintain a cooking temperature of at least 400 degrees.
  8. After about two hours, check the brisket’s internal temperature. It’s acceptable to punch the thermometer through the butcher paper.
  9. Continue cooking until the brisket’s internal temperature reaches 203 degrees at its thickest part. While this seems oddly specific, this temperature is universally regarded as the magic temperature in which a brisket is perfectly rendered.
  10. At 203 degrees, remove the wrapped brisket from the smoker and place it in a cooler. Hold the brisket in the cooler for at least 90 minutes. This is a critical step in that the cooler provides a gradual cool-down period for the brisket and allows it to reabsorb its juices. This period allows the bark to recover from a high-heat cook. This process replicates the cambro boxes that BBQ pros and chefs use in their kitchens and restaurants. The hold is a very critical step and enhances the overall quality of your end product. A brisket –– or multiple briskets –– can be held in a cooler for up to five hours at a safe temperature. This is useful when preparing a brisket for an event or for travel.
  11. The brisket can be sliced once it has cooled to about 160 degrees. Slicing a brisket when it’s too hot will result in messy slices and lost juices. Slice the brisket’s “flat” side against the grain. When you reach the thick part – the point – the grain will change so you’ll rotate it 90-degrees and slice. Here’s how Aaron Franklin slices a brisket.

Key Considerations

Choosing a brisket.Trimmed or untrimmed will work. If you buy untrimmed, you’ll need to trim it yourself with a kitchen knife. It isn’t difficult. I like to trim a brisket so that there’s no more than one-quarter inch of fat in any area. I used a ruler the first few times to ensure I was trimming it properly. Unlike a lot of weekend brisket weekend warriors, I don’t put extensive thought into the type of brisket I buy. The rub, wood, and overall method are determines the outcome of your brisket.

Choosing the right wood. Post oak wood provides Texas smoked brisket’s signature flavor. I occasionally accent a fire with hickory chunks, but this isn’t necessary.

Fire. I prefer Kingsford charcoal. There are several popular brands and types of charcoal, but I’ve found Kingsford burns the best.

Injections. Sometimes I use injections, sometimes I don’t. The difference is marginal when you’re smoking at this temperature. I’ve injected briskets with apple juice, Dr. Pepper, apple cider vinegar, beef broth and worcestershire sauce. Injections are fun, but the success of your brisket doesn’t depend on them.

The rub. The brisket’s bark is a critical element of its flavor and texture. After I rinse the brisket and pat it dry with paper towels, I sprinkle it with a generous coat of kosher salt. Kosher salt, coarse black pepper and Salt Lick Rub are critical ingredients. I like to use Costco’s brand of coarse black pepper. I’ve tried a number of rubs, and nothing really compares to Salt Lick.

Wrap or no wrap? I wrap my briskets once the internal temperature hits 170 degrees internal temperature. A brisket will “stall” at this temperature, which means the steam generated as a result of the fat rendering will keep a brisket at a given temperature for a long time. Sometimes many hours. When you wrap at the stall, you preserve the integrity of the bark. Wrapping also helps the brisket “punch through” the stall faster than it would otherwise.

Cooking time. This is a wild card. There are many dynamics at play when it comes to cooking time. Brisket weight, humidity and outside air temperature all influence cook times. Your brisket is done when the internal temperature reaches 203 degrees then has cooled to at least 160 degrees. Count on a 5 hour cook and at least one hour to hold.

3 thoughts on “Hot and Fast Smoked Texas Brisket

  1. Pingback: Monday, March 30, 2020 – Michael Castellon

  2. Pingback: My Most Read Stuff of 2020 – Michael Castellon

  3. Pingback: Chef – Michael Castellon

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s